Samsung SNP-1000A User Manual page 102

10X PTZ Network Camera SNP-1000A
If there are problems in operation, please refer to the items below. If
the problem persists, please contact the agent you purchased this
product from.
Problem
Nothing appears on the
screen.
The video image is not
clear.
The screen is dark.
There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen.
98
Solution
Please check the power connection.
Please check
connecting the video signal line
Open MS-DOS window to check
whether 10X PTZ Network Camera
SNP-1000A is connected to network.
※ In case of ping 192.168.1.100,
replace it with IP address set up.
Please check if the lens is clean.
Please clean the lens with a clean
cloth or brush.
Please adjust the contrast feature of
the monitor.
Please make sure that the screen is
not exposed directly to a bright light.
Please move the camera if necessary.
Please adjust the contrast feature of
the monitor.
If you have an intermediate device, set
the 75Ω/Hi-z properly, and check the
terminals.
Please check if an appropriate power
source to the camera complies with
the manufacturer's
requirement, or if the voltage keeps
changing.
the images after
standard