3.1.2
Selection of the communication mode
This machine has three types of communication mode. The mode to be used is determined according
to the combination of the types of the circuits and communication and available function of the other
side's machine.
Telephone circuit
3.1.3
Procedure to select the transmission mode
START
Other side machine has the
Toshiba original
procedure mode?
Other side machine has
ECM mode?
Other side machine has G3 mode?
*1
This step is only checked when the other side machine has CRP2 (+ CRP1) or when the trans-
:
mission is started by the CRP calling. (The first transmission to the other side with CRP1 only
is performed in the ECM mode.)
GD-1150/1151/1200/1201/1160/1260
DIALING/COMMUNICATION CONTROL
Communication mode
Toshiba original procedure
*1
YES
NO
YES
NO
YES
ECM
Communication using the
Toshiba original procedure
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
3 - 2
G3
ECM communication
G3 communication