Toshiba e-STUDIO3510c Operator's Manual page 78

2 HOW TO MAKE COPIES
5
Place the next original, and press the [START] button.
Data scanning of this original starts.
The next original will also be scanned in the same manner when you press the [YES]
button on the touch panel and then press the [START] button on the control panel.
Repeat the above procedure until the scanning of the last page of the original fin-
ishes.
6
When scanning of all pages has finished, press the [FINISHED] but-
ton on the touch panel.
Copying starts. The paper exits with its copied side down.
When the drawer runs out of paper during copying, the corresponding drawer on the
touch panel and the [JOB STATUS] button on the control panel blink. Add paper to
this drawer or select another one with the same paper size.
Be careful because the paper exit area and paper just after exiting are hot.
76 Making Copies