Toshiba e-STUDIO3510c Operator's Manual page 206

5 USING THE EDITING FUNCTIONS
6
Change the number of repeat using the [< 2] and [8 >] button, and
then press the [ENTER] button.
Copying is repeated in the vertical direction.
If the repeated image runs off the specified paper size, the part run off will not be cop-
ied.
7
Turn over the original.
Set the original with its face down
and bottom toward you and fit its top
left corner against that of the original
glass.
Select other copy modes as
required.
8
Press the [START] button.
204 IMAGE REPEAT