Changing Default Settings - Tripp Lite SmartOnline SU10KRT3/1X Owner's Manual

6 – Standard Operation
6-6 UPS System Settings and Measurements
Settings and Special Functions
After the UPS starts up completely, press
button to execute special functions. Special functions include buzzer ON
Q1
Buzzer "ON"
Q2
Buzzer "OFF"
R1
Self-Test "OFF"
R2
Self-Test "ON"
S1
Bypass Acceptance Range #1

Changing Default Settings

Make sure the UPS system is OFF
buzzer sounds twice, then release the buttons. Except for buzzer
by pressing the "Previous/Change Setting"
changes, press and hold the OFF
Z
UPS Off
continued
to view settings and execute special functions. Scroll down
S2
Bypass Acceptance Range #2
T
Frequency Tolerance Window
U
Output Voltage Setting
V1
UPS Normal Mode
V2
UPS Economy Mode
. Press the "ON" button and "Next" button
Z
Q1
button. After changing settings, press the "Enter" button
button for five seconds, then release the button
AA
Data Saved
continued
or buzzer OFF and self-test OFF
Q1 Q2
simultaneously for approximately three seconds until the
/ and self-test / , all other default settings may now be changed
Q2 R1 R2
.
BB
14
to review the settings. Use the
or self-test ON
R1
V3
Fixed 50 Hz Output
V4
Fixed 60 Hz Output
W
Output Voltage Adjustment (±3%)
X
UPS Identification Number
Y
Parallel Mode Enable/Disable
(P 02 = Parallel Mode Enable)
to save all changes
AA
BB
Settings Changes Canceled
.
R2
. To cancel all