HP Pro 3010 Business PC Specification page 9

QuickSpecs
System Details
Unit Environment and Unit Environment and Unit Environment and Unit Environment and
Operating Conditions Operating Conditions Operating Conditions Operating Conditions
General Unit Operating Guidelines General Unit Operating Guidelines General Unit Operating Guidelines General Unit Operating Guidelines
Keep the computer away from excessive moisture, direct moisture and the extremes of heat and
cold, to ensure that unit is operated within the specified operating range.
Leave a 4 in (10.2 cm) clearance on all vented sides of the computer to permit the required
airflow.
Never restrict airflow into the computer by blocking any vents or air intakes.
Do not stack computers on top of each other or place computers so near each other that they are
subject to each other's re-circulated or preheated air.
Occasionally clean the air vents on the front, back, and any other vented side of the computer.
Lint, dust and other foreign matter can block the vents and limit the airflow.
If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must
be provided on the enclosure, and the same operating guidelines listed above will still apply.
Temperature Range (MT) Temperature Range (MT) Temperature Range (MT) Temperature Range (MT) Operating
Relative Humidity (MT) Relative Humidity (MT) Relative Humidity (MT) Relative Humidity (MT)
Maximum Altitude (MT) Maximum Altitude (MT) Maximum Altitude (MT) Maximum Altitude (MT)
(unpressurized)
Temperature Range (SFF) Temperature Range (SFF) Operating Temperature Range (SFF) Temperature Range (SFF)
Relative Humidity (SFF) Relative Humidity (SFF) Relative Humidity (SFF) Relative Humidity (SFF)
Maximum Altitude (SFF) Maximum Altitude (SFF) Maximum Altitude (SFF) Maximum Altitude (SFF)
(unpressurized)
NOTE: NOTE: NOTE: NOTE: Operating temperature is de-rated 1.0 deg C per 1000 ft (300 m) to 7500 ft (2286 m) for MT
and 10000 ft (3000m) for SFF above sea level, no direct sustained sunlight. Maximum rate of change is
7.5 deg C/Hr for MT and 10 deg C/Hr for SFF. The upper limit may be limited by the type and number
of options installed.
DA - 13491 Worldwide — Version 1 — November 5, 2009
Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
Operating Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
Operating Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
Operating Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
Operating Operating Operating Operating
Non-operating Non-operating Non-operating Non-operating
HP Pro 3010 Business PC HP Pro 3010 Business PC HP Pro 3010 Business PC HP Pro 3010 Business PC
41° to 95° F (5° to 35° C)
–22° to 149° F (–30° to 65° C)
10% to 90% (non-condensing at ambient)
5% to 95% (non-condensing at ambient)
10,000 ft (3048 m)
30,000 ft (9144 m)
50° to 95° F (10° to 35° C)
–22° to 140° F (–30° to 60° C)
10% to 90% (non-condensing at ambient)
10% to 95% (non-condensing at ambient)
10,000 ft (3048 m)
30,000 ft (9144 m)
Page 9