HP Pro 3010 Business PC Specification page 12

QuickSpecs
System Details
Power Consumption in ES
Mode - Suspend to RAM
(S3) (Instantly Available
PC)
High voltage immunity
China Telecom YD/T 993-
2006 spec
System Environmental System Environmental System Environmental System Environmental
Specs Specs Specs Specs
<3W
up to 410V/s
Yes
Values are subject to change without notification and are for reference only.
Performance of system, options, and ancillary equipment will vary depending on the system
configuration.
Levels presented do not account for non-HP/Compaq installed hardware.
Ambient Air Temperature Operating Ambient Air Temperature Ambient Air Temperature Ambient Air Temperature
Humidity Humidity Humidity Humidity
Altitude Altitude Altitude Altitude
Shock Shock Shock Shock
DA - 13491 Worldwide — Version 1 — November 5, 2009
Operating Operating Operating
Storage Storage Storage Storage
Operating Operating Operating Operating
Storage Storage Storage Storage
Operating Operating Operating Operating
Non-Operating Non-Operating Non-Operating Non-Operating
Listed are the levels of vibration the product can withstand with No damage
being incurred. The values represent a flat random vibration input
acceleration profile across the given frequency range.
Non-Operating Non-Operating Non-Operating Non-Operating
HP Pro 3010 Business PC HP Pro 3010 Business PC HP Pro 3010 Business PC HP Pro 3010 Business PC
<3W
N/A
N/A
MT: Operating 41° to 95°F (5 to 35°C) (Test 0 to
104°F (40°C));
SFF: 50° to 95°F (10° to 35°C) at sea level with
an altitude de-rating of 1.0°C per every 1000 ft
(300 m) above sea level to a maximum of
10000 ft (3048 m), no direct sustained sunlight.
Maximum rate of change is 50°F/Hr (10°C/Hr).
The upper limit may be limited by the type and
number of options installed.
MT: Storage: 90% RH @ 60°C for 12 hours
(Non-condensing)
SFF: –22° to 140°F (–30° to 60°C).
MT: 10% to 90% relative humidity (Rh), 35°C
non-condensing
SFF: 10% to 90% relative humidity (Rh), 35°C
maximum wet bulb temperature, non-condensing
MT: 90% relative humidity (Rh), 60°C for
12 hours, non-condensing
SFF: 90% relative humidity (Rh), 60°C for
12 hours, non-condensing
MT: 0 to 10,000 feet (0 to 3048 meters) – This
value may be limited by the type and number of
options installed.
SFF: 0 to 10,000 feet (0 to 3048 meters) – This
value may be limited by the type and number of
options installed. Maximum allowable altitude
change rate is 1,000 ft/min (304.8 m/min).
MT: 0 to 30,000 feet (0 to 9,144 meters)
SFF: 0 to 30,000 feet (0 to 9,144 meters) –
Maximum allowable altitude change rate is 1200
ft/min (365.76 m/min).
35G's (Half-sine Shock)
30G's (Trapezoidal Shock)
Page 12