Vauxhall Ampera Infotainment Manual page 90

Voice output: "Please, say a device
number to select."
User: <device_number>.
Voice output: "Do you want to select
the device number <device_num‐
ber>?."
(The device name appears on the
infotainment display screen)
User: "Yes."
Voice output: "One moment. The
system searches for the selected
device."
Voice output: "Device number
<dev_num> is selected, ending
session."
Telephone number dialling
After the "Dial" command, the voice
control requests input of a number.
The telephone number must be
spoken in your normal speech without
any artificial pauses between the
numbers.
Recognition is best if a pause of at
least half a second is made after
every three to five digits. The
infotainment system then repeats the
numbers recognised.
Available Commands:
■ "Dial": the inputs are accepted.
■ "Digits": a numeric value between
"0-9" is entered.
■ "Delete": the number last entered or
the block of numbers last entered is
deleted.
■ "Plus": a preceding "+" is entered
for a call abroad.
■ "Verify": the inputs are repeated by
the voice output.
■ "Asterisk": an asterisk "*" is
entered.
■ "Hash": a hash character "#" is
entered.
■ "Pause": a pause is entered into the
character sequence.
■ "Help"
■ "Cancel"
The telephone number entered can
have a maximum length of 25 digits.
Phone
To be able to make a call abroad you
can say the word "Plus" (+) at the
beginning of your number. The plus
allows you to call from any country
without knowing the prefix for calls
made abroad in that country. Then
say the required country code.
Example of a dialogue
User: "Dial."
Voice output: "Please, say the
number to dial."
User: "Plus Four Nine."
User: "Seven Three One."
Voice output: "Seven Three One."
User: "One One Nine Nine."
Voice output: "One One Nine Nine."
User: "Dial."
Voice output: "The number is being
dialled."
Making a call using nametag
When the "Call" command is used, a
telephone number is entered that has
been stored in the telephone book as
a nametag.
89