Vauxhall Ampera Infotainment Manual page 85

84 Phone
4. Select the mobile phone from the
list.
The SAP passcode prompt is
shown on the infotainment display
containing a 16-digit code.
5. Enter the displayed SAP
passcode in the mobile phone
(without spaces).
The mobile phone PIN is shown
on the infotainment display.
If the PIN request function is
active on the mobile phone, the
PIN for the SIM card must be
entered.
Using UHP with infotainment
controls
Pairing a phone
If your mobile phone has simple
pairing or auto discovery features,
they need to be turned off before the
mobile phone can be paired to the
UHP system. Reference the mobile
phone manufacturer's user guide for
information on these features.
1. Press the CONFIG button.
2. Press : on a navigation radio.
3. Select Bluetooth.
4. Select Pair or Add device
(Handsfree). A four-digit number
appears on the display and the
UHP system goes into discovery
mode.
5. Start the pairing process on the
mobile phone that will be paired to
the vehicle. Reference the mobile
phone manufacturer's user guide
for information on this process.
Locate the device named UHP
followed by a four‐digit number in
the list on the mobile phone and
follow the instructions on the
mobile phone. Enter the four-digit
code provided by the system if
necessary, then follow the
instructions on the infotainment
display screen.
6. Repeat Steps 1 through 5 to pair
additional mobile phones.
Viewing all paired and connected
phones
To view all available mobile phones
that are paired to the UHP system:
1. Press the CONFIG button.
2. Press : on a navigation radio.
3. Select Bluetooth.
4. Select Device list.
5. Repeat Steps 1 through 4 to pair
additional mobile phones.
Deleting a paired phone
To remove a paired mobile phone
from the UHP system:
1. Press the CONFIG button.
2. Press : on a navigation radio.
3. Select Bluetooth.
4. Select Device list.
5. Select the mobile phone to delete
and follow the on screen prompts.