Vauxhall Ampera Infotainment Manual page 88

Dual tone multi-frequency (DTMF)
tones
The UHP system can send numbers
during a call. This is used when
calling a menu‐driven phone system.
To access this system:
1. Press the TUNE/MENU knob and
select Enter number.
2. Enter the character sequence.
Operating UHP using voice
control
The voice control of the UHP system
enables you to operate several
functions of the mobile phone using
your voice. The UHP system uses
voice commands to control the
system and dial phone numbers.
After input of the command, the
infotainment system guides you
through the dialogue with appropriate
questions and feedback to achieve
the desired action. The commands
and numbers can be spoken without
a pause between the individual
words.
In addition, you can save telephone
numbers under a nametag selected
by you. The telephone connection
can be set up with this name.
In the event of incorrect operation or
incorrect codes, the voice control
gives you voice feedback and
requests you to re-enter the desired
command. Apart from this, the voice
control acknowledges important
commands and will ask if necessary.
In order that calls made inside the
vehicle do not lead to unintentional
voice activation of the mobile phone,
the voice control does not start until it
has been activated.
Activating the voice control
Press the 3 button on the steering
wheel to activate the voice control of
the UHP system. The system
responds with a tone. After the tone,
say "Dial."
For the duration of the dialogue, any
audio source that is active is muted
and any traffic news fade-in is
cancelled.
Phone
Adjusting the volume for voice output
Turn the volume knob of the
infotainment system or press the + / -
buttons on the steering wheel.
Cancelling dialogue
There are different ways to deactivate
the voice control and cancel the
dialogue:
■ Press the 4 button on the
steering wheel controls.
■ Enter the command "Cancel."
■ Do not enter a command for some
time.
■ The command is unrecognised
after three tries.
Main menu commands
The UHP system has a set of main
menu commands that are available
when voice control is first started.
After the voice control is activated, a
short tone indicates that the voice
control system is waiting for a
command.
87