Radio Commands; Cd/Dvd/Disc Commands; Voice Recognition Commands; General Navigation Commands - Vauxhall Ampera Infotainment Manual

Display [help]: The system plays back
helpful advice about display
commands and some common
display commands which are
available to adjust the display setting.
Navigation [help]: The system plays
back helpful advice about navigation
commands and some common
navigation commands which are
available.

Voice recognition commands

The following list shows the voice
commands available for the
navigation system with a brief
description of each. The commands
are listed with the optional words in
square brackets. To use the voice
commands, see the instructions listed
previously.
Display commands
Display [set | select] day [mode]: This
command instructs the system to
switch the display to day mode.
Display [set | select] night [mode]:
This command instructs the system to
switch the display to night mode.
Display [set | select] auto [mode]: This
command instructs the system to
switch the display to auto mode.
Display [help]: This command
instructs the system to play back
helpful advice about display
commands and some common
display commands which are
available to adjust the display setting.

Radio commands

(Radio | Radio band) A M, "Radio
FM", (Radio | Radio band) (FM | F
M): These commands instruct the
system to go to either the AM or FM
radio bands.
Radio select <frequency> A M, Radio
select <frequency> (FM | F M): These
commands instruct the system to go
to a specific frequency on either the
AM or FM band. For example, radio
select ninety seven point one FM or
radio select ten forty AM.
radio [help]:This command instructs
the system to play back some helpful
advice about radio commands and
some common radio commands
which are available to the user.
Voice recognition

CD/DVD/disc commands

The following commands are only
available when a CD, MP3 or DVD is
loaded.
Radio (CD | C D | DVD | D V D |
Disc): These commands instruct the
system to go to Disc mode.
Radio (CD | C D | DVD | D V D | Disc)
select <y>: These commands instruct
the system to play a specific track on
the disc. For example: Radio (CD | C
D | DVD | D V D | Disc) select (ten |
one (oh | zero)). This command
supports up to 254 tracks.
(CD | C D | DVD | D V D | Disc) help:
This command instructs the system to
play back helpful advice about disc
commands and some common disc
commands which are available.

General navigation commands

Feedback on, Feedback off: This
command instructs the system to turn
on and off the voice recognition
feedback. When feedback is on, the
system responds to commands with a
77