Vauxhall Ampera Infotainment Manual page 84

3. Select Bluetooth.
4. Select Activation.
Changing Bluetooth code
The default Bluetooth code should
work with most mobile phones. If you
are having difficulty pairing your
mobile phone, you can change the
code at any time.
1. Press the CONFIG button.
2. Press : on a navigation radio.
3. Select Bluetooth.
4. Select Change Bluetooth code.
5. Enter a new four-digit code, then
select Ok.
Ring tone
There are three different ring tones
available for the UHP system.
To change the ring tone:
1. Press the CONFIG button.
2. Press : on a navigation radio.
3. Select Ring tone.
4. Select Ring tone 1, Ring tone 2 or
Ring tone 3.
Default settings
Selecting this option will reset the ring
tones and the Bluetooth code.
Pairing
A Bluetooth‐enabled mobile phone
must be paired to the UHP system
first and then connected to the vehicle
before it can be used. See the mobile
phone manufacturer's user guide for
Bluetooth functions before pairing the
mobile phone.
Pairing information:
■ Up to five mobile phones can be
paired to the UHP system.
■ The pairing process is disabled
when the vehicle is moving.
■ The UHP system connects with the
first available paired mobile phone
in the order the phones were
paired.
Phone
■ Only one paired mobile phone can
be connected to the UHP system at
a time.
■ Pairing should only need to be
completed once, unless changes to
the pairing information have been
made or the mobile phone is
deleted.
SIM access profile (SAP) mode
If equipped, this feature allows a
wider range of functions via the phone
portal including security and
messaging functions. The functions
depend on the network provider. In
SAP mode, the phone is in standby
mode and only the Bluetooth
connection and SIM card are active,
which leads to lower energy usage.
Connecting a phone via SAP
1. Turn the infotainment system on.
2. Press the CONFIG button.
3. Select Add SIM access device
(SAP).
The system scans for available
devices and displays a list of
devices found.
83