Measurement Operation; Dc Voltage Measurement - UNI-T UT60F Operating Manual

Measurement Operation(1)

A. DC Voltage Measurement
( figure 3)
Warning
To avoid harms to you or damages to the Meter from
eletric shock, please do not attempt to measure
voltages higher than 1000V, although readings may
be obtained.
The DC Voltage ranges are:
Model UT60F: 400mV, 4V, 40V, 400V and 1000V;
Model UT60G: 600mV, 6V, 60V, 600V and 1000V.
To measure DC voltage, connect the Meter as follows:
1.
Insert the red test lead into the HzV terminal and the
black test lead into the COM terminal.
2.
Set the rotary switch to V
default or press BLUE button to select DC measurement
mode.
3.
Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model UT60F/G: OPERATING MANUAL
(see figure 3)
Select
red
;DC measurement is
17
black