Design Features Performance
ELECTRICAL SPECIFICATIONS
OVERLOAD PROTECTOR
Compressor Pins
To measure start winding resistance, measure across the C-S pins.
To measure run winding resistance, measure across the C-R pins. These pins should never measure any
resistance to ground. This would indicate a shorted compressor.
Specifications
FF7.5HBK Compressor Start Winding:
FF7.5HBK Compressor Run Winding:
Water Valve Coil Resistance:
Bypass Coil Resistance:
Pump Motor Winding Resistance:
STARTING RELAY
RELAY COVER
11.2 OHMS
2.2 OHMS
280 OHMS
380 OHMS
71.5 OHMS
9
SERVICING
R
S
C
CLRCO036