Trap Setting - D-Link DGS-1224T Manual

Trap Setting

The Trap Setting enables the device to monitor the Trap through the
Web Management Utility, set the Trap IP Address of the manager
where the trap to be sent.
u
System Events: Monitoring the system's trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong password login,
and it will record from where the IP to be login.
u
Twisted Pair Port Events: Monitoring the copper port status.
Abnormal* Receive Error: a trap when there are receive data
error in copper port.
Figure 25.
Figure 26. Trap Setting
31