Port Settings
In Port Settings menu (Figure 1 7), this page will show each port's
status, press the ID parameter to set each port's Speed, Flow Control,
QoS priority and Link Status . When you need to renew the posted
information, press the "Refresh" button.
The Link Status in the screen will show the connection speed and
duplex mode; else this dialog box will show down when the port is
disconnected.
Note:
1.
Be sure that you have to re-setting the Gigabit port when
transferring the media type ( F iber to Copper or Copper to
Fiber ).
The priority of Gigabit Fiber port is higher than Copper.
Figure 17. Port Setting
25