Rear Panel - D-Link DGS-1224T Manual

Rear Panel

AC Power Connector:
This is a three-pronged connector that supports the power cord. Plug
in the female connector of the provided power cord into this connector,
and the male into a power outlet. Supported input voltages range from
100-240V AC at 50-60Hz.
Reset:
The Reset button is to reset all the setting back to the factory default.
Note: Be sure that you recorded the setting of your device, else all
the setting will be erased when pressing the "Reset" button.
Figure 5. Rear panel of the Switch
¡´
Reset
button
12