Installing And Connecting Led Control Board - TYAN Transport GX28 B2880T1S User Manual

3.8 Installing and Connecting LED Control Board (Pre-Installed)
Features of LED Control Board
Front Panel
Mute Switch
Fan Fail
Temp Fail
1. Place the LED control board properly
and secure with 2 flat-head screws
(indicated in circle). Make sure that a
plastic sheet is placed under the LED
control board for insulation purpose)
2. Connect the 40-pin consolidated flat
ribbon cable to the connector on the
LED control board.
2 x USB ports
Power Switch
19
http://www.tyan.com
40-pin connector
(connected to SCA backplane
through a consolidated cable)
2 x LAN LEDs
4 x HDD LEDs
Link/Activity
Reset Switch
A plastic sheet
under the LED
control board
for insulation
purpose
Mounting
holes