TYAN M3289 User Manual page 34

•
Power Management Panel
o Click "Power Management Panel"
o "Refresh" Icon
"Power Down" Icon
o "Power UP" Icon
"Power UP" Icon with "Boot to
BIOS" checked
o "Power Cycle" Icon
o "Reset" Icon
o "Reset" Icon + "Boot to BIOS"
o "Cold Reset" Icon
o "Warm Reset" Icon
34
http://www.tyan.com
to access all Out-of-Band power
management features of the target
system
- Click the icon to instantly update
SMDC Information
- Click the icon to hard shutdown
the target system
- Click the icon to power up the
target system
- Click the "Power UP" icon with
"Boot to BIOS" checked to get
into the target system BIOS
setup when system is powered
up
- Click the icon to power cycle the
target system
(Target system would power down
for a few seconds then power up)
- Click the icon to reset the target
system
-
checked
- Click the icon with "Boot to
BIOS" checked to get into target
system BIOS after system is
reset
-
- Click the icon to cold reset
SMDC
-
- Click the icon to warm reset
SMDC