Table of Contents
Advertisement
Quick Links
P1103/P1103B
Version 1.00
Copyright
Copyright © MiTAC Computer Corporation, 2009. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC Computer Corp.
Trademark
All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.
®
TYAN
is a trademark of MiTAC Computer Corporation.
®
Broadcom
is a trademark of Broadcom Corporation.
Notice
Information contained in this document is furnished by MiTAC Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
®
warranty, relating to sale and/or use of TYAN
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will MiTAC be held liable for any direct
or indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
Advertisement
Table of Contents
Related Manuals for TYAN P1103
Summary of Contents for TYAN P1103
- Page 1 Corporation and has been reviewed for accuracy and reliability prior to printing. MiTAC assumes no liability whatsoever, and disclaims any express or implied ® warranty, relating to sale and/or use of TYAN products including liability or warranties relating to fitness for a particular purpose or merchantability. MiTAC retains the right to make changes to product descriptions and/or specifications at any time, without notice.
- Page 2 There will be danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by manufacturer. Dispose of used battery according to manufacturer instructions and in accordance with your local regulatio- -ns. http://www.tyan.com...
-
Page 3: Table Of Contents
1.1 - Overview ....................... 5 1.2 - Product Features ................... 5 1.3 - Software Specifications ................. 6 Chapter 2: P1103 Dual Port GbE NIC Installation ......7 2.1 - Board Image ....................7 2.2 - Card Parts, Jumpers and Connectors ............8 2.3 - Tips on Installing P1103/P1103B in Chassis .......... -
Page 4: Before You Begin
Before you begin… Check the box contents! The retail motherboard package should contain the following: 1 x P1103/P1103B LAN Card (with full height bracket) 1 x Half-height bracket 1 x P1103 Quick reference guide ® 1 x TYAN Driver CD... -
Page 5: Chapter 1: Instruction
GbE transceiver, is a generic of 4 x PCI-E 1.1 card providing 2 GbE copper interfaces with RJ45 connectors. P1103/P1103B has a cut through option which provides LAN1 to LAN 2 cutting through when system power down or is controlled by system software. -
Page 6: Software Specifications
Power down (S5) or Power up or Driver load. Emulates standard NIC Independent Bypass operation in every two ports. 1.3 - Software Specifications The P1103 supports the following operating systems: Windows XP x86/x64; Windows 2003 R2 x86/x64; Windows 2008 x64 SP2; Windows Vista x64 RHEL 5.3 x86/x64 SLES 10 SP2 x64, SLES 11 SP2 x86/x64 Cent OS 5.2 x64, Cent OS 5.3 x86/x64... -
Page 7: Chapter 2: P1103 Dual Port Gbe Nic Installation
Chapter 2: P1103 Dual Port GbE NIC Installation 2.1 - Board Image P1103: P1103B: http://www.tyan.com... -
Page 8: Card Parts, Jumpers And Connectors
J1, J2/J4, J3, J5, J6 and SW1 are reserved for bypass function. This diagram is representative of the latest LAN card revision available at the time of publishing. The card you receive may not look exactly like the above diagram. http://www.tyan.com... - Page 9 J4 Pin2 Pin_1 RELAY_ V_RL_R RELAY_PIN1 Signal Pin_1 PIN6 ESET J3: FPGA_PROGRAM Pin_1 Signal FPGA_PROGRAM J5: PTC_Mode Select (for P1103B Bypass function) Pin_1 PTC_MODE Signal J6: JTAG (for P1103B Bypass function) FPGA FPGA FPGA FPGA Signal _TMS _TDI _TDO _TCK http://www.tyan.com...
- Page 10 S5 -->Power ON : Blinking once Driver load: Keep light LED9 FPGA Configuration Indicator Note: LED6/7/8/9 are for P1103B Bypass function. SW1: Address Switch (for P1103B Bypass function) SMBus Switch1 Switch2 Switch3 Switch4 Address 0x40 0x42 0x44 0x46 0x48 0x4A 0x4C 0x4E http://www.tyan.com...
-
Page 11: Tips On Installing P1103/P1103B In Chassis
2.3 - Tips on Installing P1103/P1103B in Chassis Before installation, do the following: Power down the system. Remove the power cord from the wall socket. Use industry standard anti-static equipment (such as gloves or wrist strap) and/or an environment that prevents accidental electrostatic discharge. -
Page 12: Led Color Definition
In the rare circumstance that you have experienced difficulty, you can find help by asking your vendor for assistance. If they are not available for assistance, please find setup information and documentation online at our website or by calling your vendor’s support line. http://www.tyan.com... -
Page 13: Appendix: P1103B Bypass Function
Installing ByPass Program You need to perform the required installation first. Note: ByPass program can support Windows 2003 R2 x86/x64, RHEL 5.3 x86/x64, Cent OS 5.2 x64, Cent OS 5.3 x86/x64, SLES 10 SP2 x64 and SLES 11 SP2 x86/x64. http://www.tyan.com... - Page 14 1. First run ByPass-Win2003-V1.00.exe to install the ByPass program. The default path is C:\Program Files\Mitac_ByPass, and you can select another path to install. Figure: Installation on Windows 2. A Security Alert-Driver Installation window will pop-up, click Yes. Figure: Security Alert-Driver installation http://www.tyan.com...
- Page 15 # rpm –ivh Bypass-CentOS-5.3- V1.00-0.x86_64.rpm 4. Install the source RPM package of SLES 10 SP2 x64: # rpm –ivh Bypass-SUSE-10- V1.00-0.x86_64.rpm 5. Install the source RPM package of SLES 11 SP2 x86/x64: # rpm –ivh Bypass-SUSE-11- V1.00-0.i586.rpm # rpm –ivh Bypass-SUSE-11- V1.00-0.x86_64.rpm http://www.tyan.com...
- Page 16 3. Uninstall the software of Cent OS 5.3 x86/x64: # rpm –e Bypass-CentOS-5.3 4. Uninstall the software of SLES 10 SP2 x64: # rpm –e Bypass-SUSE-10 5. Uninstall the software of SLES 11 SP2 x86/x64: # rpm –e Bypass-SUSE-11 http://www.tyan.com...
- Page 17 This chapter gives you an overview of the ByPass program user interface. Figure: ByPass Program User Interface Performing Tasks This chapter contains two parts, one is about application on Windows 2003 OS, and the other is about application on Linux OS. http://www.tyan.com...
- Page 18 This property represents the number of the NIC card on your computer. Figure: NIC Number PassThru SMBus Addr This property represents the PassThru SMBus Addr such as 0x40 and 0x44. If you want to change, please refer to SW1: Address Switch (for P1103B Bypass function). Figure: PassThru SMBus Addr http://www.tyan.com...
- Page 19 Product Ver This property represents the product version of NIC card on your computer. Figure: Product Version PassThru FW Ver This property represents the PassThru Firmware version of NIC card on your computer. Figure: PassThru FW Version http://www.tyan.com...
- Page 20 Submit to set the state of device. Normal - device works as ordinary NIC when system power on. Disconnect - device switches to Disconnect state when system power on. ByPass - device switches to Disconnect state when system power on. http://www.tyan.com...
- Page 21 Submit to set the state of device. Normal - device works as ordinary NIC when system power off. Disconnect - device switches to Disconnect state when system power off. ByPass - device switches to Disconnect state when system power off. Figure: State On S5 http://www.tyan.com...
- Page 22 Disable - disable Watch Dog timer. 10 Seconds - start Watch Dog timer with 10 seconds timeout value..- start Watch Dog timer with ... second timeout value. 255 Seconds - start Watch Dog timer with 255 seconds timeout value. http://www.tyan.com...
- Page 23 Figure: ByPass Watchdog Timer Note1: ByPass watchdog timer can be changed only when the ByPass Mode is on enable mode. Present State This property represents the present state of your NIC. Normal - device is on Normal mode at present. Figure: Normal http://www.tyan.com...
- Page 24 Disconnect - device is on Disconnect mode at present. Figure: Disconnect ByPass - device is on Bypass mode at present. Figure: ByPass http://www.tyan.com...
- Page 25 Figure: Refresh Force Normal Use this property to switch the device to the Normal mode forcibly. Click the Force Normal button. A confirm window will pop up Yes/No dialog, click yes to enter force normal mode. Figure: Force Normal http://www.tyan.com...
- Page 26 Figure: Force Disconnect Force Bypass Use this property to switch the device to the Bypass mode forcibly. Click the Force ByPass button. A confirm window will pop up Yes/No dialog, click yes to enter force ByPass mode. Figure: Force ByPass http://www.tyan.com...
- Page 27 Note3: To verify the setting of watchdog timeout value work or not, you can type “BypassUI.exe Stop_Service” in a command prompt window and NIC card will switch from normal to bypass mode when watchdog timer count down to zero. http://www.tyan.com...
- Page 28 ./bpc [-d SMBUS_ADDR] [-c] [-s] Description Disable the ByPass watchdog function of NIC card with SMBUS_ADDR. -d SMBUS_ADDR Specify the SMBus address of NIC card. Disable the ByPass watchdog function of NIC card. Save the configuration of specified NIC card. http://www.tyan.com...
- Page 29 SYNOPSIS ./bpc [-d SMBUS_ADDR] [-v] Description Get the version information of PassThru FW. -d SMBUS_ADDR Specify the SMBus address of NIC card. Get the version information of PassThru FW. ./bpc [-h] Description Get this help message. Get help information. http://www.tyan.com...
- Page 30 http://www.tyan.com...
-
Page 31: Technical Support
(which can have expensive consequences). If these options are not available for you then TYAN Computer Corporation can help. Besides designing innovative and quality products for over a decade, Tyan has continuously offered customers service beyond their expectations. - Page 32 The RMA number should be prominently displayed on the outside of the shipping carton and the package should be mailed prepaid. TYAN will pay to have the board shipped back to you Document #: D2030 - 100 http://www.tyan.com...