Installing The Memory - TYAN Thunder K8WE S2895 User Manual

2.10 - Installing the Memory

Before attempting to install any memory, make sure that the memory you
have is compatible with the motherboard as well as the processor.
The following diagram shows common types of DDR SDRAM modules:
Here are a few key points to note before installing memory into your
Thunder K8WE:
Always install memory beginning with CPU1 DIMM-A1.
In order to access memory on CPU2, both processors must be
installed.
Single, pairs, or four modules are supported on each CPU.
Configure memory symmetrically on each CPU for best performance.
AMD Opteron
(interleaved) memory configurations
At least ONE Registered DDR SDRAM module must be installed for
the system to turn on and POST (power on self test)
128MB, 256MB, 512MB, 1GB, and 2GB* Registered
PC3200/PC2700/PC2100 DDR SDRAM memory modules are supported
All installed memory will be automatically detected
The Thunder K8WE supports up to 16GB* with two CPU' s installed.
* Not validated at the time of print; subject to change.
TM
processors support 64bit (non-interleaved) or 128bit
http://www.tyan.com
25