Trip Computer Reset; Lap Timer - Triumph Daytona 675 Handbook

will begin to flash. The minutes display is
adjusted in the same way as for the hours.
Once both hours and minutes are correctly
set, press the 'Set' button to confirm the
setting. The display will cease to flash.

Trip Computer Reset

1
2
1. Trip computer display
2. Scroll button
3. Set button
Warning
Do not attempt to switch between the trip
computer display modes or reset the trip
computer with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
To reset the trip computer only, select one of
the trip computer displays, press the 'Scroll'
and 'Set' buttons simultaneously
2 seconds. After 2 seconds,
computer, not the clock, will reset.
General Information

Lap Timer

8
6
1
4
2
-1
0 MIN x 100
1. Lap timer display
The lap timer will provide the following
information: Lap time, number of laps,
maximum
distance travelled. Each display provides the
3
following information:
Lap Time
The elapsed time of the lap (the lap number
will be displayed in the speedometer display
position). Information is recorded for each lap
since the last reset.
Note:
• The lap timer will record up to
99 minutes,
9 tenths of a second. After this
time, the display will reset to zero.
Number of Laps
The number of recorded laps since the last
for
reset is displayed. Up to a maximum of
the trip
99 laps can be stored by the lap timer.
6
4
2
-1
0 MIN
1
speed, average speed
59 seconds
8
x 100
and
and
27