Trip Computer - Triumph Tiger XR Owner's Handbook Manual

Trip Computer

1
2
1. SCROLL button, up
2. SCROLL button, down
3. SET button
To access the trip computer information,
press and release the SET button on the
left hand switch housing until the
desired display is visible. The display will
cycle through in the following order:
• Trip Meter 1
• Trip Meter 2
• Information
• Setup.
Trip Meters
2
3
1. Trip meter display
2. Trip meter 1 display
3. Trip meter 2 display
Press and release the SET button on
the left hand switch housing until the
desired trip meter is visible.
Note:
Press and release the SCROLL button
on the left hand switch housing. The
display
3
following order:
Each display provides the following
information:
Journey Distance
The total journey distance travelled
since the trip meter was last reset to
zero.
Journey Time
The total time elapsed since the trip
meter was last reset to zero.
Average Fuel Consumption
An indication of the average fuel
consumption since the trip meter was
last reset to zero. After being reset the
display will show dashes until 0.1 miles/
km has been covered.
Average Speed
The average speed is calculated from
1
when the trip computer was last reset
to zero. After being reset the display will
show dashes until one mile/km has been
covered.
General Information
• The journey time, average fuel
consumption and average speed
displays are not available on Tiger
XR and Tiger XC models.
will cycle
• Journey distance
• Journey time
• Average fuel consumption
• Average speed.
through in the
35