Format Settings - Canon Mk2500 User Manual

4.5 Format Settings

This section describes format setting items and settings procedures.
You can set formats for individual pages, and there is also a default format used when creating
or inserting new pages.
There procedure for setting a format for an individual page is described here. The procedure for
setting the default format is the same.
If you try to change the different page format by selecting more than one page in the data list,
the settings will revert to the unset state (become blank settings).
1
In the data list, select the page whose format you want to change, and then select
[Format Setting] – [Page Setting] from the [Edit] menu.
(To change the default format, select [Format Setting] – [Default Setting] from the
[Edit] menu.)
The Change Format or Default Setting dialog box appears.
2
Set each of the items.
[Orientation]:
[Frame]:
Selects the orientation for printing.
Select from Hor/Hor char, Vert/Vert char or Vert/Hor char.
The default at installation is [Hor/Hor char].
[Vert/Hor char] print is only available when there are no
characters input.
Selects the type of frame to surround the characters.
Select from None,
.
The default at installation is [None].
When the cut length is less than 6 mm, you cannot select
a frame.
32
Operating Mk2500PC
, , , or