Completing Software Projection Settings - Canon Networked Multi-Projection Set Up And Instructions Manual

Completing Software Projection Settings

Software settings can be configured to specify the image quality of computer
projection, user nicknames, and other details.
1
Click next to the computer icon.
2
The settings window is displayed. Complete each setting as needed, and
then click [OK].
Available settings are as follows. (Types of settings vary slightly by mode.)
When setting windows are displayed while layout windows are minimized to the taskbar,
some information may be cut off.
Picture qual setting
Real
Select one of the following options, depending on your
preferred image quality and frame rate.
High : Projects at a lower frame rate while
emphasizing image quality. Select this
mode if lower image quality is not
acceptable.
Medium : Projection with image quality and frame
rate balanced.
Low : Projects at lower image quality to maintain
a high frame rate. Select this mode to
reduce the network bandwidth used for
projection.
On : Projection matching the computer display
resolution. Available under the following
conditions.
When projecting from a single computer—
or during projection from multiple
computers, when projecting an enlarged
image from one computer—at a display
resolution lower than the projector
resolution.
Off : Automatically adjust the projection size to
match the projector screen size.
66