Message List - Canon Mk2500 User Manual

Message List

If a trouble occurs with the printer connected, an error message or a warning message is
displayed on the Status Monitor.
Message
No media.
End of media.
End of ribbon.
Start of media not
detect.
No ribbon cassette.
Cutter initialization
error
Media JAM
Cover is open
Feeder error.
Head home sensor
error
Head initialization
error
Ribbon near end
USB I/O error
Description
An attempt was made to print while
no printing media has been loaded.
The end of the printing media was
reached while printing was in
progress.
The end of the ribbon cassette was
reached while printing was in
progress.
An operation was attempted while
the printing media was not inserted
properly.
An attempt was made to print while
no ribbon cassette was installed.
It is impossible to initialize the cutter
position for some reason.
Tube or label tape is jammed.
An operation was attempted while
the cover was open.。
An error occurred in the optional
tube feeder due to some cause.
It is impossible to move the print
head to the printing position for
some reason.
It is impossible to initialize the print
head position for some reason.
Remaining ribbon is low when
printing. (approximately 10m
remaining)
A communication error has
occurred.
52
Appendix
Action
Load the print media.
Take out the printing media
from the printer, and replace it
with new printing media.
Install a new ribbon cassette.
Take out the printing media,
reinstall it correctly,
Install a ribbon cassette.
Power the printer off and on
again.If the same message
appears again, contact your
nearest dealer.
Remove the jammed printing
media according to "If a Tube or
Label Tape Becomes Jammed"
in the Mk2500 User's Guide.
Close the cover.
Consult the User's Manual for
the tube feeder.
Power the printer off and on
again.If the same message
appears again, contact your
nearest dealer.
Power the printer off and on
again.If the same message
appears again, contact your
nearest dealer.
Have a new ribbon cassette
ready. Replace with new ribbon
cassette if printing a long
document.
Check connections again.
Power the computer and printer
off and on again.