Canon Mk2500 User Manual page 40

[Lines]:
[Continuous]:
3
Click the [OK].
The set length check takes place.
•
If there is a page to which the specified settings cannot be applied, a message
asking whether to apply the changes only to those pages that can be changed.
•
If the settings cannot be applied to any pages, "Cannot modify." appears.
During actual printing, the printer may automatically change the settings made at
data creation according to the printing media type in order to maintain the
required print quality. Refer to
(P.35).
Selects the number of lines.
Select either 1 Line,2 Lines or 3 Lines.
The default at installation is [1 Line].
When [Character Size] is set to [6mm Half] or [6mm
Norm], the number of lines is automatically set to 1 line.
(You cannot change the number of lines.)
You can select [3 Lines] only when [Character Size] is set
to [1.3mm Norm].
Selects the number of items to be printed.
Select from 1-100.
The default at installation is [1].
"Printing with [Specify] Specified for Set Length"
34
Operating Mk2500PC