Esc Ixy2; Specify Machine Settings; Number Of Labels) - Brother P-touch PT-9800PCN Template Manual

ESC iXy2

Specify machine settings (full cut option–specify cutting after specified

number of labels)

[ASCII] ESC i X y
[Decimal] 27 105 88 121 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 79 32 nh1 nh2 nh3
[Parameters] nh1: 01h (fixed)
nh2: 00h (fixed)
01h≤nh3≤63h
[Description]
・Specifies that the tape will be cut after the specified number of labels. (If the full cut setting
is ON, the tape will be cut after the number of labels specified with this setting.)
nh3: Makes a full cut after a specified number of labels (00h to 63h)
・This command is a static command.
[Remarks]
・The full cut label number setting can be between 1 and 99. This command becomes invalid
if any other value has been specified.
[Example]
・To cut after every five labels (However, the full cut setting must be ON.)
ESC i X y 2 01h 00h 05h
(1Bh 69h 58h 79h 32h 01h 00h 05h)
2 n1 n2 n3
45