Esc Ixi2; Specify Command Mode - Brother P-touch PT-9800PCN Template Manual

ESC iXi2

Specify command mode

[ASCII] ESC i X i
[Decimal] 27 105 88 105 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 69 32 nh1 nh2 nh3
[Parameters]
[Description]
・Switches the mode.
nh3=00h: ESC/P mode (default)
nh3=01h: Raster mode
nh3=03h: P-touch Template mode
・This command is a static command.
[Remarks]
Invalid if the specified value is any other than those that can be set
2 n1 n2 n3
nh1: 01h (fixed)
nh2: 00h (fixed)
nh3: 00h 01h 03h
41