Brother P-touch PT-9800PCN Template Manual page 11

⑭ Auto cut setting
If auto cutting is selected, the cut operation will be performed after the number of labels
specified in ⑰.
⑮ Half cut setting
Specifies half cutting. If the check box is selected, half cuts are made. If the check box is
cleared, half cuts are not made.
⑯ Special tape setting
Specifies the special tape (no cut) setting. If the check box is selected, the special tape
setting is enabled, and the auto cut and chain printing settings are disabled (same as
being turned off). If the check box is cleared, the special tape setting is disabled, and the
operations for the auto cut and chain printing settings are performed as specified.
⑰ Cut number setting
A number between 1 and 99 can be specified.
⑱ Chain printing setting
Specifies chain printing. If the check box is selected, chain printing is enabled, and the
tape is not fed or automatically cut after the last label is printed. If the check box is
cleared, chain printing is disabled, and the tape is fed and automatically cut after the last
label is printed.
⑲ Mirror printing setting
Specifies mirror printing. If the check box is selected, mirror printing is enabled. If the
check box is cleared, mirror printing is disabled.