^CP
Chain printing setting
[ASCII] ^ C P n
[Decimal]
94 67 80 nd
[Hexadecimal]
5E 43 50 nh
[Parameters]
0≤n≤1
[Description]
・Specifies whether or not chain printing is applied.
n:
Chain printing setting
(OFF: 0 (default); ON: 1)
・This command is a dynamic command.
[Remarks]
・Invalid if n is a value other than 1 or 0
[Example]
・To use chain printing:
Since chain printing will be enabled, n=1. Therefore, the command will be as follows.
^ C P 1
(5Eh 43h 50h 31h)
16