Esc Ixx2 Specify Default Character Size - Brother RJ-4030 Software Manual

ESC iXX2 Specify default character size

ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n1: 02h (Fixed)
n2: 00h (Fixed)
00h≤n3≤FFh, 00h≤n4≤01h
Description
Specifies the default character size.
n3+(n4*256): Default character size (dots)
The following settings (dots) are valid.
The maximum valid setting is n=400.
*The manufacturer's default is 24.
This command is a static command.
Remarks
Invalid if the setting is a value outside of the allowable range
i X X 2
105 88 88 50
69 58 58 32
- 91 -
n1 n2 n3 n4
n1 n2 n3 n4
n1 n2 n3 n4
ESC/P Command Reference
5. Control Command Details