Wlan Status; Ethernet (For Mfc-J825Dw/J835Dw And Dcp-J925Dw); Mac Address; Network I/F (For Mfc-J825Dw/J835Dw And Dcp-J925Dw) - Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual

Multi-protocol on-board ethernet multi-function print server and wireless ethernet multi-function print server

Hide thumbs Also See for Multi-Protocol On-board Ethernet Multi-function Print Server:

Table of Contents

Control panel setup

WLAN Status

Status

This field displays the current wireless network status.

Signal

This field displays the current wireless network signal strength.

SSID

This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID

name.

Comm.Mode

This field displays the current wireless network communication mode.

Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in 10BASE-T

full or half duplex mode by auto negotiation.

Note

If you set this value incorrectly, you may not be able to communicate with your print server.

The MAC address is a unique number assigned for the machine's network interface. You can check your

machine's MAC address from the control panel.

You can choose the network connection type, wired network connection or wireless network connection. If

you want to use the wired network connection, choose Wired LAN, and if you want to use the wireless

network connection, choose WLAN. You can only have one network connection type active at a time.

Table of Contents