Restoring The Network Settings To Factory Default - Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual

Control panel setup

Restoring the network settings to factory default

You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
Note
• For MFC-J825DW/J835DW and DCP-J925DW, this function restores all wired and wireless network
settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications. (For
more information, see Other Management Utilities uu page 7.)
For MFC-J425W/J430W/J432W/J435W
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 for Reset.
e
Press 1 for Reboot.
f
The machine will re-start.
For MFC-J280W/J625DW/J825DW/J835DW and DCP-J525W/J725DW/J925DW
a
Press Menu.
b
Press Network.
c
Press a or b to display Network Reset and then press Network Reset.
d
Press Yes.
e
Press Yes for 2 seconds to confirm.
4
4
4
4
38