Sending An E-Mail With User Authentication - Brother Multi-Protocol On-board Ethernet Multi-function Print Server Network User's Manual

Security features

Sending an E-mail with user authentication

This machine supports POP before SMTP and SMTP-AUTH methods to send an E-mail via an E-mail server
that requires a user authentication. These methods prevent an unauthorized user from accessing the E-mail
server. You can use Web Based Management and BRAdmin Professional 3 to configure these settings. You
can use POP before SMTP and SMTP-AUTH methods for E-mail Notification, E-mail reports and Internet fax
sending.
E-mail server settings
You need to match the settings of SMTP authentication method with the method used by your E-mail server.
Contact your network administrator or your ISP (Internet Service Provider) about the E-mail server
configuration.
You will also need to check SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP
server authentication.
SMTP settings
 You can change the SMTP port number using Web Based Management. This is useful if your ISP (Internet
Service Provider) implements the "Outbound Port 25 Blocking (OP25B)" service.
 If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
 If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method if needed.
7
7
65