Fax Redial; Storing Numbers; Storing A Pause; Storing One Touch Dial Numbers - Brother MFC-7340 User Manual

• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Start to try again. If you want to make a
second call to the last number dialled, you
can save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialled from
the control panel.
Dialling and storing numbers

Storing numbers

You can set up your machine to do the
following types of easy dialling: One Touch,
Speed Dial and Groups for Broadcasting
faxes. You can also specify the default
resolution for each One Touch and
8
Speed Dial number. When you dial a
quick dial number, the LCD shows the name,
if you stored it, or the number. A scan profile
can also be stored along with the fax number.
If you lose electrical power, the quick dial
numbers stored in the memory will not be lost
because they are stored permanently.
A scan profile is the resolution and other scan
settings that you choose when you store a
number.

Storing a pause

Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.
Storing one touch dial
numbers
Your machine has 4 One Touch keys where
you can store 8 fax or telephone numbers for
automatic dialling. To access numbers 5 to 8,
hold down Shift as you press the One Touch
key.
a
Press Menu, 2, 3, 1.
b
Press the One Touch key where you
want to store a number.
8
8
8
8
57