Transferring Your Faxes Or Fax Journal Report - Brother MFC-7340 User Manual

Error Message
Scan Unable XX
(XX = Enter Code)
Toner Life End
Toner Low
Transferring your faxes or Fax
Journal report
If the LCD shows:
Init Unable XX
Print Unable XX
Scan Unable XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine
on page 119 or Transferring faxes to your PC
on page 119.)
118
Cause
The machine has a mechanical
problem.
The drum unit and toner cartridge
assembly is not installed
correctly, or the toner cartridge is
used up and printing is not
possible.
If the LCD shows Toner Low,
you can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life and the toner will soon
need replacing.
B
Action
Do one of the following:
(MFC-7340 and MFC-7440N only)
See Transferring your faxes or Fax
Journal report on page 118 before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from the
power for several minutes and then
reconnect it.
(MFC-7450, MFC-7840N and MFC-
7840W only)
Disconnect the machine from the power
for several minutes, then reconnect it.
(The machine can be turned off for up to
4 days without losing faxes stored in the
memory. See Transferring your faxes or
Fax Journal report on page 118.)
Do one of the following:
Re-install the toner cartridge and drum
unit assembly.
Replace the empty toner cartridge with a
new one. (See Replacing a toner
cartridge on page 134.)
Order a new toner cartridge now.
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report
to another fax machine on page 119.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.