Table of Contents
Advertisement
Quick Links
Model HTI-3060AF
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
305829
p/n
Rev. D ECN-13420
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
IMPORTANT: DO NOT DISCARD THIS MANUAL
PRINTED IN UNITED STATES OF AMERICA
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION MANUAL
BAIN MARIE
022
BUILT-IN
STYLE
HEATED
TANKS
MODELS
HTI-300AF
HTI-400AF
HTI-500AF
HTI-3060AF
Includes
INSTALLATION
USE & CARE
08
M022
0215 cps
Advertisement
Table of Contents
Related Manuals for Wells HTI-300AF
Summary of Contents for Wells HTI-300AF
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
- Page 2 (775) 689-5707 or fax (775) 689-5976 if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are for information and other details concerning warranty. SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.
-
Page 3: Table Of Contents
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS... - Page 5 FEATURES & OPERATING CONTROLS (continued) NOTE: A. CONTROLS Heating elements must be The ON/OFF TOGGLE SWITCH controls power to the warmer. completely covered with water at all times during operation. The INDICATOR LIGHT will glow when the ON/OFF switch is turned ON.
-
Page 6: Precautions & General Information
Do not operate this appliance if the control panel is damaged. Call these instructions are not your Authorized Wells Service Agent for service. followed. The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel. -
Page 7: Agency Listing Information
AGENCY LISTING INFORMATION This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and STD 4 maintained according to the instructions in this manual. This appliance is Listed under UL File E6070 for 208V and 240V E6070 This appliance is Listed under UL File E6070 for 208V and 240V . -
Page 8: Installation
WARMER w/ CONTROL PANEL technician with full knowledge PERFORATED ELEMENT COVERS of all applicable electrical and 2 ea. HTI-300AF plumbing codes. Failure can 3 ea for all others) result in personal injury and 1" NPT VALVE property damage. - Page 9 INSTALLATION (continued) e. For heated tanks installed in plastic (e.g. Corian®) counter tops, the counter material must be protected from the heat of the warmer in order to prevent discoloration and/or deterioration. Wellsloks are not suitable for this purpose. The installer should contact the manufacturer or distributor of the countertop material for specific installation instructions.
-
Page 10: Operation
OPERATION CAUTION: OPERATION HOT SURFACE Make sure the drain valve is fully closed before turning thermostat ON. Exposed surfaces can be hot Turn ON/OFF SWITCH to ON. The INDICATOR LIGHT will glow. to the touch and may cause After several seconds the solenoid will open and begin filling the tank. burns. -
Page 11: Cleaning Instructions
Contact your Authorized Wells Service Agency to inspect warmer if water or grease contamination is suspected. Add proper amount of warm water. Turn control knob ON and... - Page 12 CLEANING INSTRUCTIONS (continued) WEEKLY CLEANING INSTRUCTIONS CAUTION: CHEMICAL BURN PREPARATIONS: Remove any insets, pans and/or adapter tops. HAZARD Drain or remove water from well if used for wet Deilimng chemicals may be operation. caustic. Wear appropriate personal protective equipment. FREQUENCY: Weekly, or whenever lime or scale is seen Follow cleaner manufacturer's accumulating on the sides of the warmer pans.
-
Page 13: Maintenance Instructions
Keep your stainless steel warmers clean and free from calcium Food Equipment Manufacturers buildup. 401 N. Michigan Avenue Use alkaline, alkaline chlorinated or non-chloride cleanser. Chicago, Illinois 60611-4267 Use citric acid-based cleaners to remove calcium deposits. (312) 644-6610 Wells Lime & Scale Cleaner (p/n 22838) is recommended. -
Page 14: Troubleshooting Suggestions
Too much water Remove water from pan until 1” of water remains in tank There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs. -
Page 15: Parts & Service
20385 service, or to order factory authorized replacement parts, DRAIN SCREEN 21709 contact your Wells authorized service agency, or call: Wellslok Extension Kits for UL Listed units approved for installation in wood counter tops Wells Bloomfield, LLC 2 Erik Circle OPTIONAL 72”... - Page 16 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.