Troubleshooting Suggestions - Wells WV-FG SERIES Operation Manual

SYMPTOM
No power to unit
Cooking appliances not
energized
Fryer (only) will not heat
Griddle (only) will not heat
Warmer Drawer will not heat
Fryer trips Hi-Limit Safety of oil
temperature fluctuated greatly

TROUBLESHOOTING SUGGESTIONS

POSSIBLE CAUSE
Not plugged in or circuit breaker
tripped
Filters not properly installed
(CHECK FILTERS lit)
Filters expended
(SERVICE REQUIRED lit)
Ansul® system discharged or not
cocked. (Buzzer sounds)
Internal damage
Fryer Power Switch not ON
Fryer Temperature Control not set Set Fryer Temperature Control to
Internal damage
Griddle Temperature Control not
set
Internal damage
Drawer Temperature Control not
set
Internal damage
Element needs cleaning
29
RECOMMENDED REMEDY
Plug unit into power receptacle
Reset circuit breaker
Install filters properly
Replace filters
Contact Ansul® Distributor for
service.
Contact Authorized Wells Service
Agent for repairs.
Press Fryer Power Switch to ON
desired temperature.
Contact Authorized Wells Service
Agent for repairs.
Set Griddle Temperature Control
to desired temperature
Contact Authorized Wells Service
Agent for repairs.
Set Drawer Temperature Control
to desired temperature
Contact Authorized Wells Service
Agent for repairs.
Circulation of oil around
thermobulbs required for proper
operation. See page 21 for
cleaning instructions.