Blaupunkt TravelPilot DX-V Operating Instructions Manual page 68

System settings
Displaying the calibration status
You can display the status of your system calibration.
1. Select "Status". Press
A window indicating the current calibration status will appear.
The status information is indicated in percent.
Manual calibration
You can also calibrate the TravelPilot DX-V manually. To do so, you have to drive a
distance of at least 110 yd at a speed of not more than 20 mph. Please note that you
should use as accurate a driving distance as possible.
1. Select "Manual". Press
Now you will be instructed to enter the distance you intend to drive.
2. Press on the remote control unit to enter the first digit. Press
3. Mark the remaining digits one after the other and press
digit.
4. Press for a longer time to confirm your entry.
OK
Now you will be instructed to drive the distance entered.
5. Follow the other instructions on the screen.
.
OK
.
OK
.
OK
to confirm each
OK
68