Blaupunkt TravelPilot DX-V Operating Instructions Manual page 65

System settings
Selecting the clock display
You have the option of switching the clock display on/off in the bottom line of the
monitor.
1. Select the "Display time" menu item. Press the
The clock display is switched on if a small tick mark appears alongside the
menu item.
Setting the standby time
You can select the amount of time that the TravelPilot DX-V will remain active after
you have switched off the ignition. The standby times available are 0, 15, 30 and 45
minutes.
1. Select "Standby time". Press
A menu for the selection of the standby time will appear.
2. Select the desired standby time. Press
The standby time selected will appear next to the menu item.
Displaying the system version
1. To display the system version, select "Version". Press
The current system versions will appear.
2. Press to exit the menu.
Entering your current vehicle position manually
1. If you would like to enter your current vehicle position manually, select "Enter
location". Press .
OK
A selection menu will appear.
2. Select the entry mode via town or map. Press
Plus Point: The entry is made in the same way as described for entering a
destination.
Allgemeines Kurzanlei-
button.
OK
.
OK
.
OK
.
OK
.
OK
Zieleingabe Touren Zielspeicher Einstellun-
65
Anhang