Table of Contents
Advertisement
AUX mode
Connecting other external audio
sources to the rear AUX input
If no C'n'C Blaupunkt accessory device and no
CD changer is connected to the device, you can
connect other external audio sources via the rear
AUX input, such as portable CD players, MiniDisc
players or MP3 players.
Note:
An adapter cable is needed to connect
an external audio source via the rear AUX
input. You can obtain this cable (Blaupunkt
no.: 7 607 897 093) from your Blaupunkt
dealer.
If you want to connect such an external audio
source, proceed as follows:
1.
Check whether the non-C'n'C mode is set for
the rear AUX input. For further details,
please read the section "Adjusting the rear
AUX input mode" in this chapter.
2.
Connect the external audio source to the
rear AUX input while the device is switched
off.
3.
In the menu of the device, switch on the
external audio source. For further details,
please read the following section, "Switching
the external audio source on/off and
selecting it".
4.
If necessary, make additional settings for the
external audio source. For further details,
please read the sections "Naming external
audio sources (AUX EDIT)" and "Mixing an
external audio source with another audio
source (MIX AUX)" in this chapter.
102
Switching the external audio source on/off
and selecting it
If you connected an external audio source to the
rear AUX input, you must activate the AUX input
in the menu. Then you can select the external
audio source with the SOURCE button 8.
"AUX" then appears on the display.
u
Press the MENU button 9.
u
Press the rocker switch @ to open the
"Syst" system menu.
u
Press the rocker switch
"AUX" menu item is selected.
u
Press the OK button : to call up the menu
item.
u
Switch between the settings with the rocker
switch or @.
•
"REAR AUX"
•
"REAR AUX"
u
Press the OK button : to select a different
function, or press the DIS•ESC button ; to
exit the menu.
@ until the
or
: AUX input on.
: AUX input off.
Hide quick links:
Advertisement
Table of Contents
