Consumer States The Water That Is Sprayed Out Is Not Hot - Bissell ProHeat Protech BS-7920F Troubleshooting Manual

Consumer reports the water that is sprayed out is not hot.
Solution 1:
**Pease NOTE: The upholstery hose does not spray heated water.
Yes, is the power switch on the unit switched to on (l) position?
Yes
** NOTE: The heater will increase the water temperature by
25°. You should start with hot tap water in the bladder.
Empty the Tank-in-Tank assembly with hot tap water (Not
boiling or water heated in the microwave).
Allow heater to warm up for about 2 minutes. Is the water
spraying out hot now?
Yes, problem solved
Prepared by Monique Lania
Is the machine switched on at the power outlet in the wall?
No, switch the power switch to ON (l) position, problem solved
No, refer customer to an Authorized Service Centre
No, switch the power on, problem solved
23
Call Servicing Guide ProHeat Protech 7920F