Quick Reference Guide - Baxi Ecogen 24/1.0 User Operating Instructions Manual

i-THINK Controller
04. November
Tuesday
Easy Menu
Button
Selector Button (Turn /Push Select)
Display showing all available segments
© Baxi Heating UK Ltd 2011
24 hour time bar for central heating and domestic
hot water - shows active programme times
- Default 6 - 9, 11 - 12 & 15 - 22
2008 08:50
Text 1
Text 2
Text 3

1.0 Quick Reference Guide

The Easy Menu Button
Commonly required functions are available more quickly via the
Easy Menu Button. To access, press the Easy Menu Button and
turn the Selector Button to scroll through, confirm your
selection by pressing the Selector Button.
Commonly required functions are shown in order below: -
1. Standby/operation - the on/off switch - in the off mode frost
protection for the appliance is active: displays
standby.
2. Hot water boost - The domestic hot water is heated to the
required temperature once.
3. Central heating mode CH1 - easy access to change the
operating mode see Section 7.1
Standby
4. Room temperature CH1 - The central heating setpoint
temperature can be altered permanently.
5. Hot water mode - easy access to change the operating
mode see Section 7.4
6. Hot water temp setpoint - The hot water setpoint
temperature can be altered permanently as long as a tank
Menu Button
sensor is fitted. If no sensor is fitted --- appears.
Display Descriptions
Burner in Operation 1 - Engine 2 - Supplementary
Heating to the Room temperature Set Point
Heating to the Reduced Set Point
Central Heating Times Active
DHW Time Active
Combustion Check Function Active
Holiday Function Active
Manual Overide - Time Switch Function Overridden
Time Switch Function Active
Wireless Communication Established
i-THINK Controller Configured as a Room Sensor
Error Message
Standby - Appliance ON/OFF (OFF = Frost Protection)
Outdoor Sensor Connected
System / Appliance Attention Required
Maintenance / Special Mode
Change Battery (only if wireless control fitted)
when in
3