Quick Reference Guide - Baxi Platinum 2 Combi 28 GA User's Operating Instructions & Important Warranty Information

i-THINK Controller
04. November
Tuesday
Easy Menu
Button
Selector Button (Turn /Push Select)
Display showing all available segments
© Baxi Heating UK Ltd 2011
24 hour time bar for central heating and domestic
hot water - shows active programme times
- Default 6am - 9am, 11am - 12pm & 15pm - 22pm
2008 08:50
1.6 bar
Text 1
Text 2
Text 3

1.0 Quick Reference Guide

The Easy menu button
Commonly required functions are available more quickly via the
Easy Menu Button. To access, press the Easy Menu Button and
scroll through, confirm your selection by pressing the Selector
Button.
Commonly required functions are shown in order below: -
1. Standby/operation - The on/off switch - in the off mode frost
protection for the appliance is active: displays
standby.
2. Hot water boost - Not applicable
3. Central heating mode CH1 - Easy access to change the
operating mode see Section 5.1
4. Room temperature CH1 - The central heating temperature
Standby
can be altered permanently.
5. Hot water mode - Easy access to change the operating
mode On or Off (Eco function - not applicable)
6. Hot water temp setpoint - The hot water temperature can
be altered permanently.
Menu Button
Display Descriptions
Burner in Operation
Heating to the Comfort Setpoint
Heating to the Reduced Setpoint
Central Heating Times Active
DHW Time Active
Combustion Check Function Active
Holiday Function Active
Manual Override
Time Switch Function Active
i-THINK Controller & Main PCB Established
i-THINK Controller Programmed as Room Sensor
Error Message
Standby - Appliance ON/OFF (OFF = Frost Protection)
Outdoor Sensor Connected
System / Appliance Attention Required
Maintenance / Special Mode
Water Pressure too low
Change Battery (only if radio control fitted)
when in
3