Baxi Ecogen 24/1.0 User Operating Instructions Manual page 14

STEP 1 - Press the MENU button.
HOLIDAY MODE
Time hot water
Holidays heating CH1
Temps / mode CH1
STEP 2 - Turn the Selector Button to
highlight 'Holidays heating CH1' and press
the Button to select the start period.
Holidays heating CH1
End
Day / month - -.- -
STEP 4 - Turn the Selector Button to
highlight 'End' and press the Button. The
Day/month starts flashing, turn the Button
to required month and day as in STEP 3
to end the holiday period.
PROGRAMME LOCK
Press the MENU button.
Turn the Selector Button to
highlight 'Operator section'
then press the Selector Button
to select.
Turn the Selector Button to
highlight 'Programming lock' then
press the Selector Button to
select. 'Off' will flash, turn
Selector Button to highlight 'On',
press Button again to confirm
and 'Programming locked' will
appear.
14
© Baxi Heating UK Ltd 2011
Holidays heating CH1
Start
Day / month - -.- -
STEP 3 - Press the Selector Button and
the Day/month starts flashing, turn the
Button to required month and press
Button to select and then repeat to select
the day.
---------------------------------------------------
Information
Set time and date
Set time and date
Operator section
Time central heating CH1
Operator section
Change Language
English
Operator section
Programming lock
Off
Operator section
Programming lock
On
7.0 Mode Selection/Temp Adjustment
7.9 Holiday mode
1. When the holiday mode is activated the 'Off' (frost
protection) mode is activated for the selected period see
section 7.1. If the holiday mode is activated then the DHW is
set to protection as well. If there is more than one heating
circuit then the Holiday mode must be activated for all circuits
to set the DHW to protection.
2. The Holiday mode is activated by using the menu button
scroll down to 'Holiday heating CH1', press the Selector
Button.
3. Press again to set the month scroll and select – (the display
will start at 01,01) set the day scroll and select.
7.10 Programme Lock
1. There is a programme lock function available to stop the
i-THINK Controller being either tampered with or accidentally
altered.
2. After the programme lock has been activated, only the
temporary setpoints, comfort, reduced temperature or the
functions via the easy menu such as standby/operation or HW
push are available for change by the user.
3. To activate the programme lock: -
a) Press the menu button to access 'Information', then scroll
and press to choose 'Operator section', scroll to the
programme lock option, press and scroll from 'Off' to 'On'.
Confirm by pressing the Selector Button.
b) Viewing the i-THINK Controller settings is still possible, but
when attempting to alter any parameters the screen will show
'Programme locked'.
4. To remove the programme lock: -
a) To temporarily unlock the i-THINK Controller press the
menu button to access 'Information' then press and hold the
easy menu and Selector Button until 'Programme temporarily
unlocked' appears.
b) In this state any alterations can be made until returning to
the standard screen when the programming lock is activated
again.
c) To remove the programme lock permanently: - whilst
temporarily unlocked, access the programme lock screen as
described above, and press and scroll from 'On' to 'Off'.
Confirm by pressing the Selector Button.
To unlock the Programme lock press and
hold the Easy Menu and Selector Button
untill 'Programming temporarily unlock'
appears. Repeat the procedure for
Programme lock untill 'Programming lock' is
highlighted, turn the Selector Button to
show Off and press to confirm.