Connecting To The Mains Water Supply; Connecting To The Water Outlet - Baumatic BDWI640 Instruction Manual

Connecting to the mains water supply

IMPORTANT: Do not connect the appliance to your mains
water supply using an old or an existing water inlet hose.
The inlet hose supplied with the dishwasher is the ONLY one
that should be us
DO NOT CONNECT THE WATER INLET HOSE TO A HOT
WATER TAP.
IMPORTANT: The inlet hose is fitted with an aqua stop.
This MUST be fitted in the upright position, as shown in
the above diagram.

Connecting to the water outlet

o Secure the drain hose, so that it cannot move whilst the
dishwasher is in use.
ed.
o The inlet hose will be located
inside
dishwasher.
o Connect the water inlet hose to a
threaded water tap that has a
3/4" thread and to the inlet hose
connector on the appliance.
o Fully tighten the inlet hose to the
water tap and the dishwasher.
the cabinet of the
39