Changing A Wash Program; Adding More Dishes - Baumatic BDWI640 Instruction Manual

o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program button (7) to choose an
selected.
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent may have already
been released or you could have hot water escaping.
o Slightly open the door of the appliance and press the program
button for about 3 seconds.
o The machine will cancel the program in progress and you can
then select the required program as usual.

Adding more dishes

IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent may have already
been released or you could have hot water escaping.
o Open the door a little way to pause the current program. Wait
until the spray arms have stopped rotating before opening the
door fully.
o The program light will stop blinking and a buzzer will sound
every minute until the door is closed again.
o Add the forgotten dishes to the upper or lower basket.
appropriate wash program for the load that you
are washing. The relevant program indicator (6)
will light to show which program you have
24