HP ProCurve Wireless Access Point 530 Installation And Getting Started Manual page 99

Operation Using 5 GHz Channels in the European Community
The user/installer must use the provided configuration utility to check the
current channel of operation and make necessary configuration changes to
ensure operation occurs in conformance with European National spectrum
usage laws as described below and elsewhere in this document.
Frequency Band
(MHz)
5150 - 5250
5250 - 5350
5470 - 5725
Transmit Power Control (TPC) for 5GHz Operation
This device employs Transmit Power Control (TPC) to reduce the potential
for interference to other communication systems operating in the 5GHz
frequency bands. The TPC feature implemented in this Wireless LAN device
must be configured by the end-user when operating in any European Commu-
nity or EFTA country. The end-user must follow the procedures explained in
the AP530 Management and Configuration Guide in order to operate this
device in accordance with European regulatory requirements for Transmit
Power control.
N o t e
The TPC procedure should be repeated when relocating this wireless device
within the current wireless network or to a wireless network in a new location.
Allowed Channels
36, 40, 44, 48
52, 56, 60, 64
100, 104, 108, 112,
116, 120, 124, 128,
132, 136, 140
Safety and EMC Regulatory Statements
EMC Regulatory Statements
Usage Maximum EIRP
(mW)
Indoor use only 200
Indoor use only 200
Indoor or outdoor use 1000
C-15