Table of Contents
Advertisement
To enable radio 1 for the access point, type exit to return to the configu-
5.
ration mode for radio 1, then type enable to enable the radio.
ProCurve Access Point 530(radio1-wlan1)# exit
ProCurve Access Point 530(radio1)# enable
ProCurve Access Point 530(radio1)#
To configure the access point's radio 2 interface, type radio 2 and repeat
6.
steps 1 to 4. Note that when the radio 2 interface mode is set to 802.11a,
the available channels are 36 to 165, depending on the country setting.
7.
To save all configuration settings from the running configuration file to
the startup configuration file, type write memory from any command level.
ProCurve Access Point 530(radio1-wlan1)# write memory
ProCurve Access Point 530(radio1-wlan1)#
Getting Started With Access Point Configuration
3-7
Hide quick links:
Advertisement
Table of Contents
